Translate

Showing posts with label Miniature lighting. Show all posts
Showing posts with label Miniature lighting. Show all posts

Friday, June 24, 2011

McKinley Dollhouse Build Blog (Electricity)

May 26 2008
Posted by Minis On The Edge
Adding Electricity
 I used a mixture of hard wire and tape wire to light up this house. Because this house has a flat back and will hang on the wall, I fed all of the wires to the back of the house by clipping off the plugs and feeding it through holes that I drilled into the back of the house.
After that, I added a 11" strip of tape wire and took the plastic cover off of the tape wire. Next, took the wire and split the two wires about half inch down and then added one side on each side of the tape. Do not let the two exposed hardwire touch each other when you lay them down. I then took some masking tape and tacked it in place so that I could do all of the wires this way. Once all wires were added, I then took my soldering iron out to heat it and while it was heating, I added soldering flux (just a little touch) to the exposed wires (All of them) so that the solder will adhear to the wires to the tape wire. 
After that, I add some solder to the tip of my soldering iron and then to the exposed wired to affix it together. I do this to all exposed wires. Here are the pictures to help you with the visual side of the instructions

After that, you can remove the little pieces of masking tape you use to help tack down the wires and keep them in place while you solder them in.




After that, I taped down all of the loose wires and labeled which room each wire it for. You can also add more lights & outlets to this later on if you like.

  Now, all you need to do is add the Junction Splice and put one prong on each side of the tape wire. Then you add your transformer lead in wire and transformer and You have Electric!



It really is simple to do. Don't over complicate things by thinking too hard.Remember, if you have more questions feel free to ask in the comment section.

Thursday, March 31, 2011

CDHM The Miniature Way Online Magazine Dollhouse Lighting

Have you ever completed your dollhouse and lighting and had the wonderful rush of excitement because you know in your heart that you have finally completed your task?  As you stand back and look at your project, have you ever noticed one of your light fixtures has a light that is not working? Was it one of the light fixtures that does not have replaceable light bulbs?

Well, you might want to click the following link to read this months New CDHM Miniature Way Magazine. It's a FREE online iMagazine and this month, I wrote an article about the issue mentioned above. See how I fixed the problem by checking out this months Issue! To go directly to the link of my Article, click Dollhouse Lighting . There are a couple of really inspiring free projects in this online magazine such as how to create "cracked eggs" by Christine Wex.

Also, our Famous Betsy Niederer is doing an online tutorial on French Pastries. Yes, this is the Betsy who was featured on Martha Stewart's show back in 2008. Yes, that is the show that I did a Dollhouse Prop for, that also showed on air on Martha. Haven't seen it still? You can check out that free tutorial by clicking Martha Stewart Featuring Betsy Niederer, CDHM, Greenleaf Dollhouses, Tracy Topps

OK, I'm off to start writing descriptions for the new items I will be listing in my CDHM store. Thank You so much for stopping by to read my blog today!

Thought of the Day ~ Good for the body is the work of the body, and good for the soul is the work of the soul, and good for either is the work of the other.  ~Henry David Thoreau

Hope you are having a FUNtastic day! I know, it's a work in progress! :D
Tracy
✿•*¨`*•. (¯`v´¯) (¯`v´¯) .•*¨`*•✿
. . . ✿•*¨`*•.¸(¯`v´¯)¸.•´*¨`*•✿ . . .
………. ....♥ •.¸.•´♥…………...